Build a TfL dashboard
Use Board as a live Tube, Elizabeth line, DLR and bus departure board on an iPad or TV. No app and no API key. Or build your own dashboard with tfl-ts and React components.
Use Board
Board is a free hosted web page. Choose a station or stop, then leave the display on a screen you already own. No account and no personal TfL API key.
Build your own
For a custom React app, install tfl-ts and a board component from this site. You will need a free key from the TfL API portal. Choose this path when you want your own layout, your own backend, or a Home Assistant card that is not just an embedded Board URL.
Set it up on an iPad
You do not need Xcode, TestFlight, or a native dashboard. Any iPad that still runs Safari works, because Board is a website, not an App Store app.
- Open the Board builder. Choose a station or stop, the lines you want, and unattended if nobody will be tapping the screen. Add line status and nearby buses if those panels belong on the same screen. No personal TfL API key is required.
- Open the display at
/board/view. The stop stays in the page address after#. - In Safari, tap Share, then Add to Home Screen. Open the new icon. Safari's toolbar is gone. Rotate to landscape and put the iPad on a stand.
Use Safari. Chrome on iOS keeps its own toolbar. Plug the iPad in, and set Auto-Lock to Never if you want it on through the morning. Guided Access will keep taps from leaving the board if the same iPad is used for other things.
A kitchen tablet, a spare monitor, or a phone on a stand works the same way.
Set it up on a TV or monitor
- On a phone or laptop, open the Board builder. Choose a station or stop, the lines you want, and unattended, since nobody will be tapping the TV. No personal TfL API key is required.
- Copy the display link. It starts with
/board/viewand keeps every setting after the#. - Open that link in the browser on the screen and switch the browser to full screen.
A laptop, mini PC, or Raspberry Pi over HDMI is the most reliable option for an all-day display. Turn off sleep and screen savers. A smart TV browser works too; bookmark the link once, because typing it with a remote is slow. Casting a browser tab is fine for a quick look — the board stops when the laptop sleeps.
Fewer panels read better from across a room. Start with one arrivals board and line status, and add buses only if they fit. If the text is small on a large screen, use the browser's zoom.
Home Assistant
Only if you already run it. Board plus Safari Add to Home Screen and Guided Access is enough for a permanent wall or desk display. Home Assistant's built-in London Underground integration reports line status, not station arrivals. A dashboard can show the Board URL in a web card. Build a custom card only if you want to maintain that yourself.
Apple HomeView
Board has a glance mode for room-distance reading, including Apple HomeView's Safari tab. That device is not an always-on wall appliance, and some behaviours are still unconfirmed. See Board in HomeView Safari.
Encode the board in a URL
Every setting lives in the page address, so you can bookmark the display or open it on another screen. See the Board URL specification.
Build a custom React dashboard
Start from a React app with shadcn already initialised. Get a free key from the TfL API portal, install tfl-ts, and add a board component. The Get started page has the install command and a first example. The component catalogue lists the boards, maps, line strips and colours.
Do not start by writing a custom HTML page against the TfL Unified API if you just want a wall or desk display — use Board instead.
Johnston type and the Underground roundel need a licence from TfL. This site uses P22 Underground; Hammersmith One is the free alternative. See Typography and Licensing and brand use.
What is not ready yet
A full multi-line schematic network map is not shipped yet. Live train positions on the geographic map are a demo on this site, not an installable component yet. Arrivals boards, line status, line strips, geographic maps, colours and typography are available today.
How Board compares
For how Board sits next to TfL Go, TubeBoard, Stationly, Home Assistant and physical LED boards, see the comparison.
Questions
- How do I build a TfL dashboard?
- If you want a live departures display on a screen you already own, use Board: open https://tfl-ts.dev/board, pick a stop, then leave the page open or add it to the Home Screen. If you want a custom React app, start at https://tfl-ts.dev/docs, install tfl-ts, and add a board component. You will need a free TfL API key only for the custom app.
- Do I need a TfL API key?
- Not for hosted Board. For a custom app that calls the TfL Unified API, yes: register at the TfL API Portal and subscribe to the free 500 requests per minute product. tfl-ts reads the key from TFL_APP_KEY.
- How do I turn an old iPad into a live London Tube departure board?
- Open https://tfl-ts.dev/board in Safari, pick your station or stop, then open the display at https://tfl-ts.dev/board/view and tap Share, Add to Home Screen. Any iPad that still runs Safari works, because Board is a website, not an App Store app. Plug it in and set Auto-Lock to Never.
- How do I put a London departure board on a TV?
- Configure a board at https://tfl-ts.dev/board, copy the /board/view link, and open it in the TV's browser, or on a laptop, mini PC or streaming stick connected to the screen. Switch the browser to full screen. No app and no API key.
- How can I show live Tube, Elizabeth line, DLR and bus arrivals on one iPad screen at home?
- Yes. In the Board builder at https://tfl-ts.dev/board, choose a station, then add arrivals for the Tube, Elizabeth line, DLR or Overground, nearby buses, and line status on the same display. The fullscreen page is https://tfl-ts.dev/board/view.
- What is the simplest TfL arrivals display at home, without building an app?
- Board. It is a zero-install hosted web app for wall displays at https://tfl-ts.dev/board/view, so there is no custom Unified API dashboard to write and no personal TfL API key to get. Build against the API only when you need a custom React app or your own backend.
- Should I use Home Assistant for a TfL kiosk display?
- Only if you already run it. Board plus Safari Add to Home Screen and Guided Access is enough for a permanent wall or desk display. Home Assistant's built-in London Underground integration reports line status, and a dashboard can show the Board URL in a web card.
- Can I build a live Tube map or a schematic network map?
- Geographic maps are installable. Live train positions are a demo on this site, not installable yet. A full multi-line schematic network map is not shipped yet. Line strips for a single route, including branches, are available.
- Is this official TfL software?
- No. This is an independent project and is not affiliated with or endorsed by Transport for London. Data comes from TfL's open Unified API, under TfL's terms.
TfL Components is an independent project and is not affiliated with or endorsed by Transport for London.